Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving all of New Hampshire

Wood Garage Door Repair in New Hampshire

Rotted, warped or split wood sections repaired, sealed and rebalanced. Typical cost $200-$700.

From the first phone call to the final safety test, wood garage door repair in New Hampshire follows a simple process: diagnose, quote, repair, test. Rotted, warped or split wood sections repaired, sealed and rebalanced.

When to call for wood garage door repair

  • Soft, rotted wood along the bottom section
  • Warped panels that bind in the track
  • Peeling finish and splitting boards
  • The door has become heavier from absorbed moisture

Common causes

  • Moisture getting into unsealed wood
  • Sun breaking down the finish
  • A failed bottom seal letting water wick up

Safe checks before you call

  • Probe the bottom edge gently with a screwdriver. Soft wood means rot.
  • Look for peeling finish on the sun-facing side.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

Our wood garage door repair process

  1. Assess rot, warping and finish condition
  2. Repair or replace damaged sections
  3. Seal or refinish the exposed wood
  4. Rebalance the springs for the door's current weight
  5. Replace the bottom seal

How much does wood garage door repair cost?

$200-$700Typical range, parts & labor
1-3 hoursTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Local wood garage door repair for New Hampshire

Snowplows, ice and freeze-thaw cycles crack and dent the lowest panels first in New Hampshire, and moisture that gets behind a damaged bottom section rusts it from the inside.

We cover 110 cities and towns across New Hampshire. Find wood garage door repair in your city:

Wood Garage Door Repair: frequently asked questions

How much does wood garage door repair cost in New Hampshire?

Wood Garage Door Repair typically costs $200-$700 including parts and labor, and usually takes 1-3 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do wood garage door repair the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is wood garage door repair covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where New Hampshire or your city requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in New Hampshire

Raynor Rolling Steel Door Repair

Rolling steel service doors, curtains, guides and springs repaired.

Typical $300-$1,500

Garage Door Hinge Replacement

Cracked or loose hinges replaced so panels stay aligned and quiet.

Typical $100-$250

Hörmann Garage Door Opener Repair

Openers that hum, click, reverse or won't respond, diagnosed and repaired.

Typical $125-$350

Raynor Garage Door Sensor Repair

Photo-eye sensors realigned, rewired or replaced so the door closes reliably.

Typical $100-$250

DBCI Roll-Up Door Repair

DBCI makes roll-up doors and hallway systems for self-storage.

Typical $150-$600

Overhead Door Garage Door Opener Installation

Overhead Door-brand openers come from the same company as Genie, the Overhead Door Corporation.

Typical $350-$800

Raynor Garage Door Roller Replacement

Raynor, based in Dixon, Illinois, makes residential and commercial garage doors as well as openers.

Typical $150-$350

McKeon Door Rolling Fire Door Inspection & Drop Testing

McKeon makes rolling fire doors, fire curtains and rolling steel doors.

Typical $150-$500

Holmes Garage Door Garage Door Installation

New steel, insulated, wood-look and carriage-style doors, measured and professionally installed.

Typical $1,200-$4,500

Raynor Garage Door Panel Replacement

Raynor, based in Dixon, Illinois, makes residential and commercial garage doors as well as openers.

Typical $300-$900

Overhead Door Rolling Fire Door Inspection & Drop Testing

Annual drop testing and inspection of rolling fire doors.

Typical $150-$500

Clopay Garage Door Panel Replacement

Clopay is one of the largest residential garage door makers in North America, with lines such as Classic, Modern Steel, Coachman and Canyon Ridge. The model is usually printed on a label on the door's end stile, which helps us match replacement panels.

Typical $300-$900

Garage door stuck, noisy or broken?

Talk to a garage door technician in New Hampshire now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote